Faceplates


Use the filters below to find the right faceplate for your door environment.



Exchange guide
Use the filters below to find the right faceplate for your door environment.







Översättningstabell


Search for any keywords from model name, art no, profile system etc.


Angled faceplates

TILL TOPPEN

 

 


SA25

Lip width: 15mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x26

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to 725.
The faceplate is made in stainless steel.

Art no: 202144674

 

Files:
 sa25 dimensional drawing (.pdf)
 sa25 connect (.pdf)
 sa25 modul (.pdf)
 sa25 måttritning (.dwg)
 sa25 connect (.dwg)
 sa25 modul (.dwg)

       
SA30-10

Lip width: 10mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x15

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to ST 4002-10.
The faceplate is made in stainless steel.

Art no: 202144772

 

Files:
 SA30-10 dimensional drawing (.pdf)
 SA30-10 connect (.pdf)
 SA30-10 modul (.pdf)
 SA30-10 connect (.dwg)
 SA30-10 modul (.dwg)

     
SA30-13

Lip width: 13mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x15

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to 730-13.
The faceplate is made in stainless steel.

Art no: 202144675

 

Files:
 SA30-13 dimensional drawing (.pdf)
 SA30-13 connect (.pdf)
 SA30-13 modul (.pdf)
 SA30-13 connect (.dwg)
 SA30-13 modul (.dwg)

       
SA30-15

Lip width: 15mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to 730-15.
The faceplate is made in stainless steel.

Art no: 202144676

 

Files:
 SA30-15 dimensional drawing (.pdf)
 SA30-15 connect (.pdf)
 SA30-15 modul (.pdf)
 SA30-15 connect (.dwg)
 SA30-15 modul (.dwg)

       
SA30-17

Lip width: 17mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to 730E.
The faceplate is made in stainless steel.

Art no: 202144722

 

Files:
 SA30-17 dimensional drawing (.pdf)
 SA30-17 connect (.pdf)
 SA30-17 modul (.pdf)
 SA30-17 connect (.dwg)
 SA30-17 modul (.dwg)

       
SA30-V

Lip width: 15mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to 730EV.
The faceplate is made in stainless steel.

Art no: 202144717

 

Files:
 SA30V dimensional drawing (.pdf)
 SA30V connect (.pdf)
 SA30V modul (.pdf)
 SA30V connect (.dwg)
 SA30V modul (.dwg)

       
SA30-H

Lip width: 15mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to 730EH.
The faceplate is made in stainless steel.

Art no: 202144718

 

Files:
 SA30H dimensional drawing (.pdf)
 SA30H connect (.pdf)
 SA30H modul (.pdf)
 SA30H connect (.dwg)
 SA30H modul (.dwg)

       
SA30-T-12

Lip width: 12mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to ST 4003-12.
The faceplate is made in stainless steel.

Art no: 202144784

 

Files:
 SA30T-12 dimensional drawing (.pdf)
 SA30T-12 connect (.pdf)
 SA30T-12 modul (.pdf)
 SA30T-12 connect (.dwg)
 SA30T-12 modul (.dwg)

       
SA30-T-15

Lip width: 15mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 245x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to 730T.
The faceplate is made in stainless steel.

Art no: 202144678

 

Files:
 SA30T-15 dimensional drawing (.pdf)
 SA30T-15 connect (.pdf)
 SA30T-15 modul (.pdf)
 SA30T-15 connect (.dwg)
 SA30T-15 modul (.dwg)

         
SA65

Lip width: 12mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 150x36x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to ST 4011-12.
The faceplate is made in stainless steel.

Art no: 202144783

 

Files:
 SA65 dimensional drawing (.pdf)
 SA65 connect (.pdf)
 SA65 modul (.pdf)
 SA65 connect (.dwg)
 SA65 modul (.dwg)

     
SA87B-13

Lip width: 13mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 200x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module.Corresponds to ST 4005-13.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-1,
but with angled lip.


Art no: 202144775

 

Files:
 SA87B-13 dimensional drawing (.pdf)
 SA87B-13 connect (.pdf)
 SA87B-13 modul (.pdf)
 SA87B-13 connect (.dwg)
 SA87B-13 modul (.dwg)

         
SA24

Lip width: 15mm
Door type: wooden or steel frames
Profile: Angled
Dimensions: 230x37x15

 

Description: 
To be used together with single latch locks
in Connect or Module.Corresponds to 824.
The faceplate is made in stainless steel.

Art no: 202144694

 

Files:
 SA24 dimensional drawing (.pdf)
 SA24 connect (.pdf)
 SA24 modul (.pdf)
 SA24 connect (.dwg)
 SA24 modul (.dwg)

       
SA32

Lip width: 15mm
Door type: wooden or steel frames
Profile: Angled single latch
Dimensions: 245x40x15

 

Description: 
To be used together with single latch locks
in Connect or Module.Corresponds to 732.
The faceplate is made in stainless steel.

Art no: 202144682

 

Files:
 SA32 dimensional drawing (.pdf)
 SA32 connect (.pdf)
 SA32 modul (.pdf)
 SA32 connect (.dwg)
 SA32 modul (.dwg)

         
SA32-T

Lip width: 15mm
Door type: wooden or steel frames
Profile: Angled single latch
Dimensions: 245x40x15

 

Description: 
To be used together with single latch locks
in Connect or Module.Corresponds to 732T.
The faceplate is made in stainless steel.

Art no: 202144683

 

Files:
 SA32T dimensional drawing (.pdf)
 SA32T connect (.pdf)
 SA32T modul (.pdf)
 SA32T connect (.dwg)
 SA32T modul (.dwg)


Montagestolpar för Daloc

TILL TOPPEN

 

         
SA82-H

Lip width: 15mm
Door type: wooden or steel frames
Profile: DALOC
Dimensions: 245x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module, designed for Daloc doors. Corresponds to ST4082H.
The faceplate is made in stainless steel.

Art no: 202144818

 

Files:
 SA82-H dimensional drawing (.pdf)
 SA82-H connect (.pdf)
 SA82-H modul (.pdf)
 SA82-H connect (.dwg)
 SA82-H modul (.dwg)

         
SA82-V

Lip width: 15mm
Door type: wooden or steel frames
Profile: DALOC
Dimensions: 245x40x15

 

Description: 
To be used together with double or single latch locks
in Connect or Module, designed for Daloc doors. Corresponds to ST4082V.
The faceplate is made in stainless steel.

Art no: 202144817

 

Files:
 SA82-V dimensional drawing (.pdf)
 SA82-V connect (.pdf)
 SA82-V modul (.pdf)
 SA82-V connect (.dwg)
 SA82-V modul (.dwg)


Flat faceplates

TILL TOPPEN

 

       
SA31-13

Lip width: 13mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 245x40

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 731-13.
The faceplate is made in stainless steel.

Art no: 202144702

 

Files:
 SA31-13 dimensional drawing (.pdf)
 SA31-13 connect (.pdf)
 SA31-13 modul (.pdf)
 SA31-13 connect (.dwg)
 SA31-13 modul (.dwg)

         
SA31-15

Lip width: 15mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 245x40

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 731-15.
The faceplate is made in stainless steel.

Art no: 202144774

 

Files:
 SA31-15 dimensional drawing (.pdf)
 SA31-15 connect (.pdf)
 SA31-15 modul (.pdf)
 SA31-15 connect (.dwg)
 SA31-15 modul (.dwg)

         
SA31-17

Lip width: 17mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 245x42

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 731-17.
The faceplate is made in stainless steel.

Art no: 202144679

 

Files:
 SA31-17 dimensional drawing (.pdf)
 SA31-17 connect (.pdf)
 SA31-17 modul (.pdf)
 SA31-17 connect (.dwg)
 SA31-17 modul (.dwg)

     
SA31-20

Lip width: 20mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 245x45

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 731-20.
The faceplate is made in stainless steel.

Art no: 202144680

 

Files:
 SA31-20 dimensional drawing (.pdf)
 SA31-20 connect (.pdf)
 SA31-20 modul (.pdf)
 SA31-20 connect (.dwg)
 SA31-20 modul (.dwg)

       
SA31-26

Lip width: 26mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 245x51

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 731-26.
The faceplate is made in stainless steel.

Art no: 202144681

 

Files:
 SA31-26 dimensional drawing (.pdf)
 SA31-26 connect (.pdf)
 SA31-26 modul (.pdf)
 SA31-26 connect (.dwg)
 SA31-26 modul (.dwg)

         
SA35

Lip width: 5mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 180x26

 

Description: 
To be used together with single latch locks
in Connect or Module.Corresponds to 735.
The faceplate is made in stainless steel.

Art no: 202144687

 

Files:
 SA35 dimensional drawing (.pdf)
 SA35 connect (.pdf)
 SA35 modul (.pdf)
 SA35 connect (.dwg)
 SA35 modul (.dwg)

       
SA50-12

Lip width: 12mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 200x40

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 750.
The faceplate is made in stainless steel.

Samma yttermått som ASSA säkerhetsslutbleck 1887-1.

Art no: 202144699

 

Files:
 SA50-12 dimensional drawing (.pdf)
 SA50-12 connect (.pdf)
 SA50-12 modul (.pdf)
 SA50-12 connect (.dwg)
 SA50-12 modul (.dwg)

       
SA50-15

Lip width: 15mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 200x40

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 750.
The faceplate is made in stainless steel.

Samma yttermått som ASSA säkerhetsslutbleck 1887-2.

Art no: 202144700

 

Files:
 SA50-15 dimensional drawing (.pdf)
 SA50-15 connect (.pdf)
 SA50-15 modul (.pdf)
 SA50-15 connect (.dwg)
 SA50-15 modul (.dwg)

      
SA64

Lip width: 11,5mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 150x36

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST4010-12.
The faceplate is made in stainless steel.

Art no: 202144782

 

Files:
 SA64 dimensional drawing (.pdf)
 SA64 connect (.pdf)
 SA64 modul (.pdf)
 SA64 connect (.dwg)
 SA64 modul (.dwg)

       
SA87-13

Lip width: 13mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 200x40

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST4009-13.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-1.


Art no: 202144695

 

Files:
 SA87-13 dimensional drawing (.pdf)
 SA87-13 connect (.pdf)
 SA87-13 modul (.pdf)
 SA87-13 connect (.dwg)
 SA87-13 modul (.dwg)

       
SA87-16

Lip width: 16mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 200x40

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST4009-16.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-2.


Art no: 202144696

 

Files:
 SA87-16 dimensional drawing (.pdf)
 SA87-16 connect (.pdf)
 SA87-16 modul (.pdf)
 SA87-16 connect (.dwg)
 SA87-16 modul (.dwg)

       
SA87-20

Lip width: 20mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 200x43,5

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST4009-20.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-3.


Art no: 202144697

 

Files:
 SA87-20 dimensional drawing (.pdf)
 SA87-20 connect (.pdf)
 SA87-20 modul (.pdf)
 SA87-20 connect (.dwg)
 SA87-20 modul (.dwg)

         
SA87-21

Lip width: 21,5mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 200x45

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST4009-21.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-4.


Art no: 202144698

 

Files:
 SA87-21 dimensional drawing (.pdf)
 SA87-21 connect (.pdf)
 SA87-21 modul (.pdf)
 SA87-21 connect (.dwg)
 SA87-21 modul (.dwg)


Faceplates for solenoid locks

TILL TOPPEN

 

 


       
SA601V-15

Lip width: 15mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 245x40

 

Description: 
To be used together with solenoid locks SAFETRON SL 520
or ASSA ABLOY EL580. For left hung doors.
The faceplate is made in stainless steel.

Art no: 202144804

 

Files:
 SA601V-15 dimensional drawing (.pdf)
 SA601V-15 + SL520 (.pdf)
 SA601V-15 + SL520 (.dwg)

     
SA601H-15

Lip width: 15mm
Door type: wooden or steel frames
Profile: Flat
Dimensions: 245x40

 

Description: 
To be used together with solenoid locks SAFETRON SL 520
or ASSA ABLOY EL580. For right hung doors.
The faceplate is made in stainless steel.

Art no: 202144805

 

Files:
 SA601H-15 dimensional drawing (.pdf)
 SA601H-15 + SL520 (.pdf)
 SA601H-15 + SL520 (.dwg)


Faceplates for SAPA profile system

TILL TOPPEN

 

 


       
SA40

Lip width: 15mm
Door type: SAPA 2050
Profile: Aluminium
Dimensions: 245x36,5

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 740.
The faceplate is made in stainless steel.

Art no: 202144688

 

Files:
 SA40 dimensional drawing (.pdf)
 SA40 connect (.pdf)
 SA40 modul (.pdf)
 SA40 connect (.dwg)
 SA40 modul (.dwg)

         
SA42

Lip width: 16mm
Door type: SAPA 2060
Profile: Aluminium
Dimensions: 245x41

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 742.
The faceplate is made in stainless steel.

Art no: 202144689

 

Files:
 SA42 dimensional drawing (.pdf)
 SA42 connect (.pdf)
 SA42 modul (.pdf)
 SA42 connect (.dwg)
 SA42 modul (.dwg)

       
SA43

Lip width: 20mm
Door type: SAPA 2074
Profile: Aluminium
Dimensions: 245x54

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to 743.
The faceplate is made in stainless steel.

Art no: 202144690

 

Files:
 SA43 dimensional drawing (.pdf)
 SA43 connect (.pdf)
 SA43 modul (.pdf)
 SA43 connect (.dwg)
 SA43 modul (.dwg)

       
SA86

Lip width: 27,5mm
Door type: SAPA 2086
Profile: Aluminium
Dimensions: 200x50

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4086.
The faceplate is made in stainless steel.

Art no: 202144776

 

Files:
 SA86 dimensional drawing (.pdf)
 SA86 connect (.pdf)
 SA86 modul (.pdf)
 SA86 connect (.dwg)
 SA86 modul (.dwg)


Faceplates for SCHÜCO profile system

TILL TOPPEN

 

 


         
SA45

Lip width: 8mm
Door type: SCHÜCO ADS 50.NI
Profile: Aluminium
Dimensions: 245x34,3

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4040.
The faceplate is made in stainless steel.

Art no: 202144691

 

Files:
 SA45 dimensional drawing (.pdf)
 SA45 connect (.pdf)
 SA45 modul (.pdf)
 SA45 connect (.dwg)
 SA45 modul (.dwg)

         
SA66

Lip width: 26,5mm
Door type: SCHÜCO ADS 65 HD
Profile: Aluminium
Dimensions: 200x48

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4026.
The faceplate is made in stainless steel.

Art no: 202144677

 

Files:
 SA66 dimensional drawing (.pdf)
 SA66 connect (.pdf)
 SA66 modul (.pdf)
 SA66 connect (.dwg)
 SA66 modul (.dwg)

         
SA67

Lip width: 15,5mm
Door type: SCHÜCO ADS 65 NI
Profile: Aluminium
Dimensions: 200x34

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4036.
The faceplate is made in stainless steel.

Art no: 202144806

 

Files:
 SA67 dimensional drawing (.pdf)
 SA67 connect (.pdf)
 SA67 modul (.pdf)
 SA67 connect (.dwg)
 SA67 modul (.dwg)

         
SA70

Lip width: 31,5mm
Door type: SCHÜCO ADS 70 HD
Profile: Aluminium
Dimensions: 200x53

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4027.
The faceplate is made in stainless steel.

Art no: 202144701

 

Files:
 SA70 dimensional drawing (.pdf)
 SA70 connect (.pdf)
 SA70 modul (.pdf)
 SA70 connect (.dwg)
 SA70 modul (.dwg)

         
SA75

Lip width: 38mm
Door type: SCHÜCO ADS 75 HD
Profile: Aluminium
Dimensions: 200x58

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4028.
The faceplate is made in stainless steel.

Art no: 202144720

 

Files:
 SA75 dimensional drawing (.pdf)
 SA75 connect (.pdf)
 SA75 modul (.pdf)
 SA75 connect (.dwg)
 SA75 modul (.dwg)

         
SA46

Lip width: 23,5mm
Door type: SCHÜCO ADS 80 FR
Profile: Aluminium
Dimensions: 245x49

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4035.
The faceplate is made in stainless steel.

Art no: 202144692

 

Files:
 SA46 dimensional drawing (.pdf)
 SA46 connect (.pdf)
 SA46 modul (.pdf)
 SA46 connect (.dwg)
 SA46 modul (.dwg)

         
SA90

Lip width: 51mm
Door type: SCHÜCO ADS 90 SI
Profile: Aluminium
Dimensions: 200x74

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4052.
The faceplate is made in stainless steel.

Art no: 202144726

 

Files:
 SA90 dimensional drawing (.pdf)
 SA90 connect (.pdf)
 SA90 modul (.pdf)
 SA90 connect (.dwg)
 SA90 modul (.dwg)


Faceplates for WICONA profile system

TILL TOPPEN

 

 


         
SA46

Lip width: 23,5mm
Door type: WICONA 65 N
Profile: Aluminium
Dimensions: 245x49

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4035.
The faceplate is made in stainless steel.

Art no: 202144692

 

Files:
 SA46 dimensional drawing (.pdf)
 SA46 connect (.pdf)
 SA46 modul (.pdf)
 SA46 connect (.dwg)
 SA46 modul (.dwg)

       
SA47

Lip width: 11mm
Door type: WICONA 65 EVO
Profile: Aluminium 
Dimensions: 200x37

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4031.
The faceplate is made in stainless steel.

Art no: 202144693

 

Files:
 SA47 dimensional drawing (.pdf)
 SA47 connect (.pdf)
 SA47 modul (.pdf)
 SA47 connect (.dwg)
 SA47 modul (.dwg)

       
SA76

Lip width: 17,5mm
Door type: WICONA 75 EVO
Profile: Aluminium 
Dimensions: 200x49

 

Description: 
To be used together with double or single latch locks
in Connect or Module. Corresponds to ST 4032.
The faceplate is made in stainless steel.

Art no: 202144773

 

Files:
 SA76 dimensional drawing (.pdf)
 SA76 connect (.pdf)
 SA76 modul (.pdf)
 SA76 connect (.dwg)
 SA76 modul (.dwg)


Vinklade montagestolpar



Montagestolpe

SA25

Dimensions: 245x40x26 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST 4038 / 725. The faceplate is made in stainless steel.

Art no: 202144674

Dokument:
 sa25 dimensional drawing (.pdf)
 sa25 connect (.pdf)
 sa25 modul (.pdf)
 sa25 måttritning (.dwg)
 sa25 connect (.dwg)
 sa25 modul (.dwg)
Montagestolpe

SA30-10

Dimensions: 245x40x15 Lip width: 10mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to 730 / ST 4002-10. The faceplate is made in stainless steel.

Art no: 202144772

Dokument:
 SA30-10 dimensional drawing (.pdf)
 SA30-10 connect (.pdf)
 SA30-10 modul (.pdf)
 SA30-10 connect (.dwg)
 SA30-10 modul (.dwg)
Montagestolpe

SA30-13

Dimensions: 245x40x15 Lip width: 13mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to 730 / ST 4002-13. The faceplate is made in stainless steel.

Art no: 202144675

Dokument:
 SA30-13 dimensional drawing (.pdf)
 SA30-13 connect (.pdf)
 SA30-13 modul (.pdf)
 SA30-13 connect (.dwg)
 SA30-13 modul (.dwg)
Montagestolpe

SA30-15

Dimensions: 245x40x15 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to 730 / ST 4002-15. The faceplate is made in stainless steel.

Art no: 202144676

Dokument:
 SA30-15 dimensional drawing (.pdf)
 SA30-15 connect (.pdf)
 SA30-15 modul (.pdf)
 SA30-15 connect (.dwg)
 SA30-15 modul (.dwg)
Montagestolpe

SA30-17

Dimensions: 245x40x15 Lip width: 17mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to 730 / ST 4002-17. The faceplate is made in stainless steel.

Art no: 202144722

Dokument:
 SA30-17 dimensional drawing (.pdf)
 SA30-17 connect (.pdf)
 SA30-17 modul (.pdf)
 SA30-17 connect (.dwg)
 SA30-17 modul (.dwg)
Montagestolpe

SA30-V

Dimensions: 245x40x15 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to 730EV / ST 4049. The faceplate is made in stainless steel.

Art no: 202144717

Dokument:
 SA30V dimensional drawing (.pdf)
 SA30V connect (.pdf)
 SA30V modul (.pdf)
 SA30V connect (.dwg)
 SA30V modul (.dwg)
Montagestolpe

SA30-H

Dimensions: 245x40x15 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to 730EV / ST 4049. The faceplate is made in stainless steel.

Art no: 202144718

Dokument:
 SA30H dimensional drawing (.pdf)
 SA30H connect (.pdf)
 SA30H modul (.pdf)
 SA30H connect (.dwg)
 SA30H modul (.dwg)
Montagestolpe

SA30T-12

Dimensions: 245x40x15 Lip width: 12mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST 4003-12. The faceplate is made in stainless steel.

Art no: 202144784

Dokument:
 SA30T-12 dimensional drawing (.pdf)
 SA30T-12 connect (.pdf)
 SA30T-12 modul (.pdf)
 SA30T-12 connect (.dwg)
 SA30T-12 modul (.dwg)
Montagestolpe

SA30T-15

Dimensions: 245x40x15 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST 4003-15. The faceplate is made in stainless steel.

Art no: 202144678

Dokument:
 SA30T-15 dimensional drawing (.pdf)
 SA30T-15 connect (.pdf)
 SA30T-15 modul (.pdf)
 SA30T-15 connect (.dwg)
 SA30T-15 modul (.dwg)
Montagestolpe

SA65

Dimensions: 150x36x15 Lip width: 12mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST 4011-12. The faceplate is made in stainless steel.

Art no: 202144783

Dokument:
 SA65-12 dimensional drawing (.pdf)
 SA65-12 connect (.pdf)
 SA65-12 modul (.pdf)
 SA65-12 connect (.dwg)
 SA65-12 modul (.dwg)
Montagestolpe

SA87B-13

Dimensions: 200x40x15 Lip width: 13mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST 4005-13.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-1, but with angled lip.

Art no: 202144775

Dokument:
 SA87B-13 dimensional drawing (.pdf)
 SA87B-13 connect (.pdf)
 SA87B-13 modul (.pdf)
 SA87B-13 connect (.dwg)
 SA87B-13 modul (.dwg)
Montagestolpe

SA24

Dimensions: 230x37x15 Lip width: 15mm
 
To be used together with single latch locks in Connect or Module. Corresponds to 824.
The faceplate is made in stainless steel.

Art no: 202144694

Dokument:
 SA24 dimensional drawing (.pdf)
 SA24 connect (.pdf)
 SA24 modul (.pdf)
 SA24 connect (.dwg)
 SA24 modul (.dwg)
Montagestolpe

SA32

Dimensions: 245x40x15 Lip width: 15mm
 
To be used together with single latch locks in Connect or Module. Corresponds to 732.
The faceplate is made in stainless steel.

Art no: 202144682

Dokument:
 SA32 dimensional drawing (.pdf)
 SA32 connect (.pdf)
 SA32 modul (.pdf)
 SA32 connect (.dwg)
 SA32 modul (.dwg)
Montagestolpe

SA32T

Dimensions: 245x40x15 Lip width: 15mm
 
To be used together with single latch locks in Connect or Module. Corresponds to 732T.
The faceplate is made in stainless steel.

Art no: 202144683

Dokument:
 SA32T dimensional drawing (.pdf)
 SA32T connect (.pdf)
 SA32T modul (.pdf)
 SA32T connect (.dwg)
 SA32T modul (.dwg)



Montagestolpar för Daloc

Montagestolpe

SA82-H

Dimensions: 245x40x15 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module, designed for Daloc doors. Corresponds to ST4082H.
The faceplate is made in stainless steel.

Art no: 202144818

Dokument:
 SA82-H dimensional drawing (.pdf)
 SA82-H connect (.pdf)
 SA82-H modul (.pdf)
 SA82-H connect (.dwg)
 SA82-H modul (.dwg)
Montagestolpe

SA82-V

Dimensions: 245x40x15 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module, designed for Daloc doors. Corresponds to ST4082V.
The faceplate is made in stainless steel.

Art no: 202144817

Dokument:
 SA82-V dimensional drawing (.pdf)
 SA82-V connect (.pdf)
 SA82-V modul (.pdf)
 SA82-V connect (.dwg)
 SA82-V modul (.dwg)



Flat faceplates

Montagestolpe

SA31-13

Dimensions: 245x40 Lip width: 13mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4001-13.
The faceplate is made in stainless steel.

Art no: 202144702

Dokument:
 SA31-13 dimensional drawing (.pdf)
 SA31-13 connect (.pdf)
 SA31-13 modul (.pdf)
 SA31-13 connect (.dwg)
 SA31-13 modul (.dwg)
Montagestolpe

SA31-15

Dimensions: 245x40 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4001-15.
The faceplate is made in stainless steel.

Art no: 202144774

Dokument:
 SA31-15 dimensional drawing (.pdf)
 SA31-15 connect (.pdf)
 SA31-15 modul (.pdf)
 SA31-15 connect (.dwg)
 SA31-15 modul (.dwg)
Montagestolpe

SA31-17

Dimensions: 245x42 Lip width: 17mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4001-17.
The faceplate is made in stainless steel.

Art no: 202144679

Dokument:
 SA31-17 dimensional drawing (.pdf)
 SA31-17 connect (.pdf)
 SA31-17 modul (.pdf)
 SA31-17 connect (.dwg)
 SA31-17 modul (.dwg)
Montagestolpe

SA31-20

Dimensions: 245x45 Lip width: 20mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4001-20.
The faceplate is made in stainless steel.

Art no: 202144680

Dokument:
 SA31-20 dimensional drawing (.pdf)
 SA31-20 connect (.pdf)
 SA31-20 modul (.pdf)
 SA31-20 connect (.dwg)
 SA31-20 modul (.dwg)
Montagestolpe

SA31-26

Dimensions: 245x51 Lip width: 26mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4001-26.
The faceplate is made in stainless steel.

Art no: 202144681

Dokument:
 SA31-26 dimensional drawing (.pdf)
 SA31-26 connect (.pdf)
 SA31-26 modul (.pdf)
 SA31-26 connect (.dwg)
 SA31-26 modul (.dwg)
Montagestolpe

SA35

Dimensions: 180x26 Lip width: 5mm
 
To be used together with single latch locks in Connect or Module. Corresponds to ST4008.
The faceplate is made in stainless steel.

Art no: 202144687

Dokument:
 SA35 dimensional drawing (.pdf)
 SA35 connect (.pdf)
 SA35 modul (.pdf)
 SA35 connect (.dwg)
 SA35 modul (.dwg)
Montagestolpe

SA50-12

Dimensions: 200x40 Lip width: 12mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to 750.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-1.

Art no: 202144699

Dokument:
 SA50-12 dimensional drawing (.pdf)
 SA50-12 connect (.pdf)
 SA50-12 modul (.pdf)
 SA50-12 connect (.dwg)
 SA50-12 modul (.dwg)
Montagestolpe

SA50-15

Dimensions: 200x40 Lip width: 15mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to 750.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-2.

Art no: 202144700

Dokument:
 SA50-15 dimensional drawing (.pdf)
 SA50-15 connect (.pdf)
 SA50-15 modul (.pdf)
 SA50-15 connect (.dwg)
 SA50-15 modul (.dwg)
Montagestolpe

SA64

Dimensions: 150x36 Lip width: 12mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4010-12.
The faceplate is made in stainless steel.

Art no: 202144782

Dokument:
 SA64-12 dimensional drawing (.pdf)
 SA64-12 connect (.pdf)
 SA64-12 modul (.pdf)
 SA64-12 connect (.dwg)
 SA64-12 modul (.dwg)
Montagestolpe

SA87-13

Dimensions: 200x40 Lip width: 13mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4009-13.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-1.

Art no: 202144695

Dokument:
 SA87-13 dimensional drawing (.pdf)
 SA87-13 connect (.pdf)
 SA87-13 modul (.pdf)
 SA87-13 connect (.dwg)
 SA87-13 modul (.dwg)
Montagestolpe

SA87-16

Dimensions: 200x40 Lip width: 16mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4009-16.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-2.

Art no: 202144696

Dokument:
 SA87-16 dimensional drawing (.pdf)
 SA87-16 connect (.pdf)
 SA87-16 modul (.pdf)
 SA87-16 connect (.dwg)
 SA87-16 modul (.dwg)
Montagestolpe

SA87-20

Dimensions: 200x43,5 Lip width: 20mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4009-20.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-3.

Art no: 202144697

Dokument:
 SA87-20 dimensional drawing (.pdf)
 SA87-20 connect (.pdf)
 SA87-20 modul (.pdf)
 SA87-20 connect (.dwg)
 SA87-20 modul (.dwg)
Montagestolpe

SA87-21

Dimensions: 200x45 Lip width: 21mm
 
To be used together with double or single latch locks in Connect or Module. Corresponds to ST4009-21.
The faceplate is made in stainless steel.

Same outer dimensions as ASSA strike 1487-4.

Art no: 202144698

Dokument:
 SA87-21 dimensional drawing (.pdf)
 SA87-21 connect (.pdf)
 SA87-21 modul (.pdf)
 SA87-21 connect (.dwg)
 SA87-21 modul (.dwg)



Montagestolpar för eltryckeslås

Montagestolpe

SA601V-15

Dimensions: 245x40 Lip width: 15mm
 
To be used together with solenoid locks SAFETRON SL520, SAFETRON SL620 Or ASSA ABLOY EL580. For left hung doors.
The faceplate is made in stainless steel.

Art no: 202144804

Dokument:
 SA601V-15 dimensional drawing (.pdf)
 SA601V-15 connect (.pdf)
 SA601V-15 modul (.pdf)
 SA601V-15 connect (.dwg)
 SA601V-15 modul (.dwg)
Montagestolpe

SA601H-15

Dimensions: 245x40 Lip width: 15mm
 
To be used together with solenoid locks SAFETRON SL520, SAFETRON SL620 or ASSA ABLOY EL580. For right hung doors.
The faceplate is made in stainless steel.

Art no: 202144805

Dokument:
 SA601H-15 dimensional drawing (.pdf)
 SA601H-15 connect (.pdf)
 SA601H-15 modul (.pdf)
 SA601H-15 connect (.dwg)
 SA601H-15 modul (.dwg)



Montagestolpar för SAPA profilsystem

Montagestolpe

SA40

Dimensions: 245x36,5 Lip width: 15mm
 
Profile: SAPA 2050

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4034.
The faceplate is made in stainless steel.

Art no: 202144688

Dokument:
 SA40 dimensional drawing (.pdf)
 SA40 connect (.pdf)
 SA40 modul (.pdf)
 SA40 connect (.dwg)
 SA40 modul (.dwg)
Montagestolpe

SA42

Dimensions: 245x41 Lip width: 16mm
 
Profile: SAPA 2060

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4033.
The faceplate is made in stainless steel.

Art no: 202144689

Dokument:
 SA42 dimensional drawing (.pdf)
 SA42 connect (.pdf)
 SA42 modul (.pdf)
 SA42 connect (.dwg)
 SA42 modul (.dwg)
Montagestolpe

SA43

Dimensions: 245x54 Lip width: 20mm
 
Profile: SAPA 2074

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4023.
The faceplate is made in stainless steel.

Art no: 202144690

Dokument:
 SA43 dimensional drawing (.pdf)
 SA43 connect (.pdf)
 SA43 modul (.pdf)
 SA43 connect (.dwg)
 SA43 modul (.dwg)
Montagestolpe

SA86

Dimensions: 200x50 Lip width: 27,5mm
 
Profile: SAPA 2086

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4086.
The faceplate is made in stainless steel.

Art no: 202144776

Dokument:
 SA86 dimensional drawing (.pdf)
 SA86 connect (.pdf)
 SA86 modul (.pdf)
 SA86 connect (.dwg)
 SA86 modul (.dwg)



Montagestolpar för SCHÜCO profilsystem

Montagestolpe

SA45

Dimensions: 245x34,3 Lip width: 8mm
 
Profile: SCHÜCO ADS 50 NI

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4040.
The faceplate is made in stainless steel.

Art no: 202144691

Dokument:
 SA45 dimensional drawing (.pdf)
 SA45 connect (.pdf)
 SA45 modul (.pdf)
 SA45 connect (.dwg)
 SA45 modul (.dwg)
Montagestolpe

SA66

Dimensions: 200x48 Lip width: 26,5mm
 
Profile: SCHÜCO ADS 65 HD

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4026.
The faceplate is made in stainless steel.

Art no: 202144677

Dokument:
 SA66 dimensional drawing (.pdf)
 SA66 connect (.pdf)
 SA66 modul (.pdf)
 SA66 connect (.dwg)
 SA66 modul (.dwg)
Montagestolpe

SA67

Dimensions: 200x34 Lip width: 15,5mm
 
Profile: SCHÜCO ADS 65 NI

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4036.
The faceplate is made in stainless steel.

Art no: 202144806

Dokument:
 SA67 dimensional drawing (.pdf)
 SA67 connect (.pdf)
 SA67 modul (.pdf)
 SA67 connect (.dwg)
 SA67 modul (.dwg)
Montagestolpe

SA70

Dimensions: 200x53 Lip width: 31,5mm
 
Profile: SCHÜCO ADS 70 HD

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4027.
The faceplate is made in stainless steel.

Art no: 202144701

Dokument:
 SA70 dimensional drawing (.pdf)
 SA70 connect (.pdf)
 SA70 modul (.pdf)
 SA70 connect (.dwg)
 SA70 modul (.dwg)
Montagestolpe

SA75

Dimensions: 200x58 Lip width: 38mm
 
Profile: SCHÜCO ADS 75 HD

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4028.
The faceplate is made in stainless steel.

Art no: 202144720

Dokument:
 SA75 dimensional drawing (.pdf)
 SA75 connect (.pdf)
 SA75 modul (.pdf)
 SA75 connect (.dwg)
 SA75 modul (.dwg)
Montagestolpe

SA46

Dimensions: 245x49 Lip width: 23,5mm
 
Profile: SCHÜCO ADS 80 FR

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4035.
The faceplate is made in stainless steel.

Art no: 202144692

Dokument:
 SA46 dimensional drawing (.pdf)
 SA46 connect (.pdf)
 SA46 modul (.pdf)
 SA46 connect (.dwg)
 SA46 modul (.dwg)
Montagestolpe

SA90

Dimensions: 200x74 Lip width: 51mm
 
Profile: SCHÜCO ADS 90 SI

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4052.
The faceplate is made in stainless steel.

Art no: 202144726

Dokument:
 SA90 dimensional drawing (.pdf)
 SA90 connect (.pdf)
 SA90 modul (.pdf)
 SA90 connect (.dwg)
 SA90 modul (.dwg)



Montagestolpar för WICONA profilsystem

Montagestolpe

SA46

Dimensions: 245x49 Lip width: 23,5mm
 
Profile: WICONA 65 N

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4035.
The faceplate is made in stainless steel.

Art no: 202144692

Dokument:
 SA46 dimensional drawing (.pdf)
 SA46 connect (.pdf)
 SA46 modul (.pdf)
 SA46 connect (.dwg)
 SA46 modul (.dwg)
Montagestolpe

SA47

Dimensions: 200x37 Lip width: 11mm
 
Profile: WICONA 65 EVO

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4031.
The faceplate is made in stainless steel.

Art no: 202144693

Dokument:
 SA47 dimensional drawing (.pdf)
 SA47 connect (.pdf)
 SA47 modul (.pdf)
 SA47 connect (.dwg)
 SA47 modul (.dwg)
Montagestolpe

SA76

Dimensions: 200x49 Lip width: 17,5mm
 
Profile: WICONA 75 EVO

To be used together with double or single latch locks in Connect or Module. Corresponds to ST4032.
The faceplate is made in stainless steel.

Art no: 202144773

Dokument:
 SA76 dimensional drawing (.pdf)
 SA76 connect (.pdf)
 SA76 modul (.pdf)
 SA76 connect (.dwg)
 SA76 modul (.dwg)