SAFETRON 6100

Motor lock 6100 is our quickest and the most advanced motor lock. 6100 locks/unlocks in less than 0.2 seconds and therefore no separate day lock is required for high-frequency doors. 6100 is designed to work with automatic door systems. Typical applications include day, night and security locks in commerce, offices and industry and in applications where demands of high security is required. SAFETRON motor lock 6100 is certified according to SS-EN 14846 Grade 7 and SSF-3522 classes 2B, 3, 4 and 5. The motor lock has a built-in navigable display. The display enables setup configuration and information extraction from the lock, e.g. installation date and error codes.

Cable lengths

Together with the TwoCom-control unit the system delivers 128-bit encryption for the highest security. The TwoCom system allows cable lengths of up to 100 metres between the lock case and the control unit. This enables new possibilities for the installation of the control unit, e.g. it can be placed in protected environments such as electric-central rooms, server rooms, etc.

Connection

The TwoCom-system connects with only two wires between the lock case and the control unit. In these two wires, power supply, communication and encryption runs parallel. Initialization is done automatically. The TC-system also adds the possibility for serial coupling of two locks against one TC-control unit, this means that the installation can be done with fewer components and thus making it more cost effective.

Emergency exit device

Motor lock 6100 can be used in emergency exits together with SAFETRON emergency exit device 795. This combination is certified according to the requirements of SS-EN 179:2008 and SSF 3522 class 2B.

Properties

  • Back set 50 mm
  • Hook bolt
  • Time for unlocking/relocking less than 0,2 sec
  • Mechanical key override (90° key turn)
  • Designed for use with automatic door systems
  • Emergency exit with Emergency exit device 795
  • Automatic initialization
  • TwoCom BUS technology
  • Event log
  • Paralell setup, up to two motor locks with one TwoCom control unit
  • Can be used without control unit (ML mode)
  • Motor lock 6100 is certified in accordance with SS-EN 14846 grade 7 and SSF-3522 class 2B, 3, 4 and 5

TECHNICAL DATA

  • Direct voltage 10-48VDC, 8-35VAC
  • Power consumption: 60 mA @ 24VDC, max 300 mA vid aktivering
  • Operating temperature -30°C till +70°C
  • Fits Scandinavian oval and round cylinder and also Abloy cylinders Protec / Sento

Description

Art nr

SAFETRON 6100 complete set
Motor lock 6100
Control unit TC CU2
Cable C06 10m
Strike plate 106-2
202144711
SAFETRON 6100 202144703