Re-entry
Re-entry is selectable when connected to the motor lock control unit. The function means that the motor lock remains in the upright position when the emergency escape device has been used. Resetting is done via potential-free closing from any source. The advantage of this type of reset is that it can be done remotely, i.e. a section of a building can be managed by e.g. a receptionist. Costly labor can be minimized as a mechanical reset at each door environment otherwise involves.
Re-entry can be done by
- Activated emergency exit 796
- Activated fire alarm
Three surface treatments
SAFETRON 700 series emergency hardware is available in three finishes. These are designed to match and be combined with door fittings in the corresponding finish from e.g. ASSA ABLOY and dormakaba.
SAFETRON 700 series emergency escape accessories are offered in these finishes:
- Chrome
- Matt chrome
- Matte black
SAFETRON 796
Certified Emergency exit device for Motor lock 6600
SAFETRON 796 is adapted for hinged doors in modular profile design with emergency escape requirements. SAFETRON 796 is approved as an emergency escape device together with SAFETRON 6600 and is mounted on the inside. The emergency escape device opens the lock with one hand and provides a safe escape.
SSF 3522 class 2B
Installed together with the SAFETRON 6600 motor lock, SSF 3522 class 2B is achieved, which means approved locking unit class 3 outside together with approved emergency exit according to SS-EN 179 from the inside.
Certified nickel free
SAFETRON 700 series emergency exit devices are certified nickel free according to EN 1811:2011 and thus comply with the EU Nickel Directive 94/27/EC. The certificate covers all surface treatments.
-
Certified SS-EN 179:2008
-
nickel free
-
Assessed by Byggvarubedömningen
-
5-year warranty
