Certified product
SAFETRON 6600 is certified according to SSF 3522 class 2A, 2B, 3, 4 and 5 and the European standard SS-EN 14846 Grade 7. SAFETRON 6500 is also approved for locking in doors with classification RC3 and RC4 with the market's leading door manufacturers.
Fire doors
SAFETRON 6600 is equipped with a reinforced hook bolt and drop bolt for handle function and restraining properties in e.g. fire doors. Motor lock 6600 is advantageously used as the only lock in doors with protection class requirements 1, 2 or 3. SAFETRON 6600 is approved in fire class E/EI120.
Modern piston placement
The SAFETRON 6600 has modern piston placement which means that the lock is adapted for modern doors from the leading door manufacturers in Scandinavia.
SAFETRON 6600
motor locks for commercial properties with high security requirements
The SAFETRON 6500 is a high performance and fast unlocking motor lock. The motor lock protects people and property in commercial buildings where it is used for locking doors with high security requirements. Installed in a certified RC-rated door, the 6600 is approved for security requirements:
- Protection class 1
- Protection class 2
- Protection class 3
The motor lock has modern piston placement which means that the motor locks are adapted to modern door handles, whether fixed or replaceable strike plate.
The 6600 motor lock disengages in 0.1 seconds, therefore a separate day lock is normally not needed on high frequency doors.
-
Certified SSF 3522
-
Lock class 5
-
Fire rating E/EI 120
-
Assessed by Byggvarubedömningen
-
5-year warranty
Order from one of our distributors
Customer accounts are required with all distributors.Integrated with access control systems
The SAFETRON 6000 series offers integrated control with several of the market's major access system suppliers via OSDP®.
This means that the motor locks can be connected directly to the access control system's door center without a controller and can then be configured through the access control system's software, providing a simplified installation and a more cost-effective door environment.
Axema VAKA |
|
NOX access system |
|
Parakey Slim |
|
Sentrion |
|
Tidomat Smartone |
|
Techsolutions Techpoint |
|
AXIS1 |
|
RCO1 |
|
Vanderbilt Omnis1 |
1 Under development
Connection via controller
Connection via the control unit is via SAFETRON CU2, which is supplied in all kit packages. The CU2 control unit has the widest range of applications on the market in a single control unit. Two motor locks can be connected without any limitation in signal exchange, this means that CU2 is effectively two controllers in one. In CU2 there is also the possibility to program AUX relays for the desired function.
Emergency exit according to SS-EN 179
SAFETRON 6600 can be used in emergency escape routes together with SAFETRON emergency escape accessories 796 according to the European standard SS-EN 179:2008, and SSF 3522 class 2B. The combination provides a door environment where requirements for both high security and emergency exit are met in one locking unit.
Re-entry
The SAFETRON 6600 together with the 796 offers the possibility of re-entry. In an emergency exit situation, the motor lock is opened via the emergency exit device, the built-in micro switch in the emergency exit device signals that emergency opening has taken place to the control unit. If re-entry is activated in the control unit, the motor lock is put in an unlocked position until a manual reset via a signal to the control unit takes place, which then locks the motor lock. Management of re-entry and reset takes place in the control unit and can therefore be administered by the parent system.
Description | Surface treatment | nickel free |
---|---|---|
SAFETRON 796 H | Chrome, Matt chrome, Matt black | |
SAFETRON 796 V | Chrome, Matt chrome, Matt black |
Developed and manufactured in Sweden
SAFETRON 6600, like all our Motor locks, is developed and manufactured in Sweden for the Scandinavian market. Our locks are made from materials that can withstand tough environments and security requirements. We do not cut corners where others do but guarantee high quality products even if it means a more expensive manufacturing process.
Hardox
Essential parts are produced in Hardox® steel from SSAB, a steel with unique properties in terms of wear resistance, hardness and toughness. Why manufacture products with materials from other countries when we are the best in the world at home?
Few moving parts
The 6000 series motorized locks are based on a design philosophy with few moving parts. Having developed and produced motorized locks for over 30 years, we know what it takes to make powerful, durable and reliable motorized locks that work in real-life door environments.